Intel PCA - Configurando a interface de rede

Verificando se o protocolo TCP/IP está instalado na interface de rede:

No Windows NT siga estes passos:

a. Start Menu.
b. Settings.
c. Control Panel.
d. Network.
e. Protocols tab.
f. Highlight TCP/IP Protocol in pull-down menu.
g. Properties button.
h. IP Address tab.
i. Verify that your TCP/IP target adapter is listed in the pull-down Adapter menu. If necessary, follow the steps indicated by Windows to add the TCP/IP protocol or to add the target NIC to the TCP/IP membership set.

No Windows 98 siga estes passos

a. Start Menu.
b. Settings.
c. Control Panel.
d. Network.
e. Configuration tab.
f. Verify that your TCP/IP target adapter is listed in the pull-down Adapter menu. If necessary, follow the steps indicated by Windows to add the TCP/IP protocol or to add the target NIC to the TCP/IP membership set.

No Windows 2000 siga estes passos:

a. Start Menu.
b. Settings.
c. Control Panel.
d. Network and Dial-up connections.
e. Double-click on Local Area Connection and verify that your TCP/IP target adapter is listed. If necessary, follow the steps indicated by Windows to add the TCP/IP protocol or to add the target NIC to the TCP/IP membership set.

Deternimando um IP fixo e uma máscara de sub-rede:

No Windows NT siga estes passos:

a. Start Menu.
b. Control Panel.
c. Network.
d. Protocols tab.
e. Highlight TCP/IP Protocol in pull-down menu.
f. Properties button.
g. IP Address tab.
h. Select the target adapter from the pull-down Adapter menu.
i. Select “Specify an IP address.”
j. Enter the IP address.
k. Enter the subnet mask .
l. Leave the Default Gateway entry blank.

No Windows 98 siga estes passos:

a. Start Menu.
b. Settings.
c. Control Panel.
d. Network.
e. Configuration tab.
f. Choose TCP/IP <Target Adapter> (in pull-down menu).
g. IP Address tab.
h. Select the target adapter from the pull-down Adapter menu.
i. Select “Specify an IP address.”
j. Enter the IP address.
k. Enter the subnet mask 255.255.255.0.
l. Leave the Default Gateway entry blank.

No Windows 2000 siga estes passos:

a. Start Menu.
b. Settings.
c. Control Panel.
d. Network and Dial-up connections.
e. Choose Local Area Connection <n> in pull-down menu.
f. Properties button.
g. Internet Protocol (TCP/IP).
h. Select “Use the following IP address.”
i. Enter the IP address.
j. Enter the subnet mask 255.255.255.0.
k. Leave the Default Gateway entry blank.